Palmclub forum

Palmclub Forum

alles over je Palm Treo smartphone of PalmOS pda

 
Ga terug   Palmclub forum > PalmOS - Algemeen > GPS en Navigatie(software)

Registreer FAQ Ledenlijst Kalender Zoeken Berichten van vandaag Markeer forums als gelezen

Reageren
 
Discussietools Weergave
  #1  
Oud 16 februari 2004, 09:32
miniad miniad is offline
Senior lid
Model: Palm Z22
 
Geregistreerd: 07 februari 2003
Berichten: 506
iQue 3600 software version Release 3 as of February 16, 2004

Op onderstaande link vind ik de nieuwe release versie 3 per ingang van 16 januari 2004.
Als ik ga downloaden krijg ik nog de oude versie..

misschien ben ik nog wat te vroeg



Release versie 3 voor de iQue
Met citaat reageren
  #2  
Oud 16 februari 2004, 09:45
miniad miniad is offline
Senior lid
Model: Palm Z22
 
Geregistreerd: 07 februari 2003
Berichten: 506
Gevonden op het internet

Helaas is mijn Engels alleen voor mijzelf te begrijpen, dus heb het maar niet vertaald..

voor de liefhebbers..

====================================================

Changes made from version Release 2 to Release 3:

Audio:
Added ability to control bass boost.
Made recording more robust.
Improved stereo sound playback.


GPS:
Added QueHunt&Fish and QueSun&Moon applications.
Corrected a rare problem that prevented the unit from acquiring satellites.
Improved warnings when setting a new location or elevation is not allowed.


Navigation/Routes/Routing:
Improved behavior when Route and Track memory becomes full.
Improved routing in certain unusual circumstances.
Added “Best-order” via point sorting.
Added the ability to cancel a Detour.
Improved visibility of route destination by drawing a checkered flag at the destination point when arriving.
Always re-center the map on the vehicle after calculating a route.
Improved overall unit responsiveness when navigating extremely dense maps.
Eliminated rare instances of drawing routes backward through roundabouts.


Mapping:
Added User Grid support.
Updated the Austrian datum.
Added the ability to view tide point information.
Added the ability to measure the distance between two points using the “Measure Distance” item in the “Que” menu of QueMap.
Improved default map zoom settings.


PIM:
Added ability to set a negative altitude for a waypoint.
Increased the number of waypoint symbols available.
Improved cooperation between password-entry dialogs and the Datebook.
Improved beaming of Datebook appointments that have a location attached.
Added alarm and Next Appointment Today features to QueClock.


SD/MMC:
Improved card accesses.


Searching:
Improved marine searching capabilities.
Added “Near Current Route” searching.
Improved messages when attempting a search that is not possible with the current map data.
Improved searching in certain unusual circumstances.
When pre-filling the address fields in QueFind from the Address Book, correctly recognize the street number and street name, regardless of whether the street number is before or after the street name.


System:
The REC button will no longer turn the unit on.
Added brightness adjustment functionality to the Power key.
The unit now turns off (instead of entering low power mode) after an alarm wakes the unit up when the GPS antenna is open.
Improved cooperation between password-entry dialogs and the Pen Input Area.
Voice guidance data copied to an expansion card using the VoiceGuidanceBackup utility will automatically get restored after a hard reset . The VoiceGuidanceBackup utility is available for download separately.
Added third party developer access to “Low Power Mode”.

Instructions for using this software


Download and save the iQue3600_Release3.zip update file to a location on your computer. This file will need to be located later, so please locate this in a readily accessible folder.


Place the iQue in the cradle and perform a HotSync on the unit to back up any of your current data. Please ensure that the iQue is fully charged before proceeding with the software update process.


Perform a Hard Reset of the unit. To perform this procedure, you will need the reset tip tool, which may be unscrewed from the head of the stylus that came with your iQue. The following instructions are also included on page 1.6 of the iQue 3600 Integrated Handheld Operating Instructions manual.
A. With the unit turned off, press and hold in the reset button on the back of the unit using the reset tip tool.
B. Continue to hold in the reset button while you press and hold the power button.
C. While holding in the power button, remove the reset tool from the reset hole.
D. Continue holding the power button until the Palm logo appears on the screen.
E. Once the Palm logo appears, release the power button.
F. Press the up button when prompted to confirm the erase of user data.


A new User for the software update will need to be created for use during the software update process.
A. Start by launching the Palm Desktop application.
B. Go to the Tools menu, then select Users... to display a list of the current users.
C. Click on the New... button to display the New User window.
D. Enter a unique name for the User, such as Release3, and then click OK.
E. Close out of the Users window by clicking OK.


If you are using Intellisync Lite or another synchronization program, from within that program, configure your new user to synchronize with the Palm Desktop or any available alternative that does not contain your primary data.


Install the software update to the new user (Release3).
A. Double click the iQue3600_Release3.zip, then unzip to a location that can be easily found, such as the Desktop. There will be three files: Updater.prc, UpdaterData.pdb, and a copy of these instructions (iQue 3600 Release 3.txt).
B. Double click the Updater.prc file. This will open the Palm Desktop Install Tool.
C. Select the new user that you have created (Release3), and click OK.
D. Double click the UpdaterData.pdb file to place it in the Palm Desktop Install Tool.
E. Close the Palm Desktop Install Tool by clicking Done, then click OK.


Place the iQue in the cradle and initiate a HotSync. A Select User window will appear. Select the new user (Release3) that you have created for the update. The Updater.prc and UpdaterData.pdb files will then be installed on the iQue.


Remove the iQue from the cradle. It is very important that the iQue's battery does not run out during the updating process, so please verify that it is fully charged.


Locate the Application called Updater. It can be found under the category of All. Once you have located the Updater Application, tap on it once. Then follow the on-screen instructions.


After about 4 minutes, the green light at the top of the unit will turn off. Once the green light at the top of the unit has disappeared, perform a Soft Reset using the reset tip tool. To perform a Soft Reset, press the reset tip tool into the Reset hole on the back of the iQue. The unit will restart within about ten seconds of the Soft Reset. Follow the on-screen setup instructions.


Verify that the software update was successful.
A. Go to the Launcher (tap on the house icon in the lower-left corner).
B. Tap the menu icon (it is the icon just to the right of the house icon in the lower-left corner).
C. A drop-down menu will appear.
D. Tap the Info... menu item.
E. Tap the version button at the bottom of the screen. The update was successful if the second line of the screen displays Palm OS software v.5.2.1r3.


To restore your previous information to the iQue, place the iQue in the cradle, then perform a HotSync. A window will appear asking to select a User. Select the User name that you have been previously been using to identify your iQue on your PC, and your information will be restored to the iQue.


Delete the temporary user (Release3) by going back to the Users window in the Palm Desktop. Select the user, click Delete... then click YES to delete it.

Laatst gewijzigd door miniad; 16 februari 2004 om 16:08.
Met citaat reageren
  #3  
Oud 16 februari 2004, 19:10
wilvangorp's schermafbeelding
wilvangorp wilvangorp is offline
Senior lid
Voornaam: Wil
Model: Garmin iQue 3600
 
Geregistreerd: 31 december 2003
Locatie: Rijen.
Berichten: 55
Software update IQUE3600

Hoi Ad,

Heb op de updatesite van Garmin gezocht naar de update waar je het over hebt, maar tref deze niet aan.Alleen een patch van december.
Heb ik behalve navigatie ook nog eens een bril nodig.

Groeten...Wil
__________________
Iedere dag feest !!
Wel zelf de vlaggetjes ophangen.
Met citaat reageren
  #4  
Oud 16 februari 2004, 19:21
miniad miniad is offline
Senior lid
Model: Palm Z22
 
Geregistreerd: 07 februari 2003
Berichten: 506
Citaat:
Heb op de updatesite van Garmin gezocht naar de update waar je het over hebt, maar tref deze niet aan.Alleen een patch van december.
Nee je hebt geen bril nodig..
Tot begin van de avond was de pagina aanwezig..
Daarna lag de Garmin op z'n gat...
En daarna kwam de site die jij gezien heb.

Er stond de hele dag een aankondiging over een nieuwe release versie 3 per ingang van 16 januari 2004.

Wat hier nu de bedoeling van is weet ik niet maar er zijn twee mogelijkheden

1 ... het is een stunt
2 ... er zijn nog fouten gevonden en de software is teruggenomen
Met citaat reageren
  #5  
Oud 16 februari 2004, 19:59
wilvangorp's schermafbeelding
wilvangorp wilvangorp is offline
Senior lid
Voornaam: Wil
Model: Garmin iQue 3600
 
Geregistreerd: 31 december 2003
Locatie: Rijen.
Berichten: 55
Citaat:
Op 16-02-2004, om 18:21 heeft miniad dit gezegd in bericht #4


Nee je hebt geen bril nodig..
Tot begin van de avond was de pagina aanwezig..
Daarna lag de Garmin op z'n gat...
En daarna kwam de site die jij gezien heb.

Er stond de hele dag een aankondiging over een nieuwe release versie 3 per ingang van 16 januari 2004.

Wat hier nu de bedoeling van is weet ik niet maar er zijn twee mogelijkheden

1 ... het is een stunt
2 ... er zijn nog fouten gevonden en de software is teruggenomen
Stunten kunnen we nog wel erbij hebben!!

Wachten wederom (on)geduldig af, want er zijn inderdaad wat ik bij jou lees een paar nuttige aanpassingen op komst.

Groet....Wil
__________________
Iedere dag feest !!
Wel zelf de vlaggetjes ophangen.

Laatst gewijzigd door wilvangorp; 16 februari 2004 om 23:08.
Met citaat reageren
  #6  
Oud 16 februari 2004, 20:05
miniad miniad is offline
Senior lid
Model: Palm Z22
 
Geregistreerd: 07 februari 2003
Berichten: 506
Wij (anderen en ik ) volgen het op de voet en als het te downloaden is zal ik het uiteraard hier direct melden.
Toch blijft het vreemd want het stond al op de site inclusief de uitleg over het instaleren..

Dus... oefenen in geduld

En ondertussen zoeken naar andere belangrijke zaken zoals een goede bevestiging op de scooter en accu aansluiting..
Met citaat reageren
  #7  
Oud 16 februari 2004, 20:24
wilvangorp's schermafbeelding
wilvangorp wilvangorp is offline
Senior lid
Voornaam: Wil
Model: Garmin iQue 3600
 
Geregistreerd: 31 december 2003
Locatie: Rijen.
Berichten: 55
Citaat:
Op 16-02-2004, om 19:05 heeft miniad dit gezegd in bericht #6
Wij (anderen en ik ) volgen het op de voet en als het te downloaden is zal ik het uiteraard hier direct melden.
Toch blijft het vreemd want het stond al op de site inclusief de uitleg over het instaleren..

Dus... oefenen in geduld

En ondertussen zoeken naar andere belangrijke zaken zoals een goede bevestiging op de scooter en accu aansluiting..
Over geduld gesproken!
Hoe lang moet jij wachten voordat je IQUE een 3D fix heeft, bij een koude start? Een aantal malen nadat ik een hardreset uitgevoerd heb ging het vlotjes, maar de laatste weken is het wachten 10 minuten of nog langer! Iedere keer hard-reset??Lijkt mij eigenlijk niet.



Groeten Wil
__________________
Iedere dag feest !!
Wel zelf de vlaggetjes ophangen.
Met citaat reageren
  #8  
Oud 16 februari 2004, 20:33
miniad miniad is offline
Senior lid
Model: Palm Z22
 
Geregistreerd: 07 februari 2003
Berichten: 506
Citaat:
Hoe lang moet jij wachten voordat je IQUE een 3D fix heeft, bij een koude start? Een aantal malen nadat ik een hardreset uitgevoerd heb ging het vlotjes, maar de laatste weken is het wachten 10 minuten of nog langer! Iedere keer hard-reset??Lijkt mij eigenlijk niet.
Laatst toen het bij mij ook erg lang duurde, en die bij een vriend niet (was een vergelijk) heb ik bij NEW Location mijn huidige locatie opgegeven en toen ging het weer behoorlijk snel..

Ik weet niet of dit bij jou is maar ik geef het maar even door
Met citaat reageren
  #9  
Oud 16 februari 2004, 21:27
koekiemonster's schermafbeelding
koekiemonster koekiemonster is offline
Moderatorkoek
Voornaam: Gerrit
Model: Garmin iQue 3600
 
Geregistreerd: 03 augustus 2002
Locatie: Oterleek
Berichten: 4.945
Stuur een bericht via MSN naar koekiemonster
Was het toevallig slecht weer (dichtbewolkt en regen) toen het fixen zo lang duurde? Bekend is dat de weersomstandigheden een grote invloed vormen.
Met citaat reageren
  #10  
Oud 16 februari 2004, 21:34
wilvangorp's schermafbeelding
wilvangorp wilvangorp is offline
Senior lid
Voornaam: Wil
Model: Garmin iQue 3600
 
Geregistreerd: 31 december 2003
Locatie: Rijen.
Berichten: 55
Citaat:
Op 16-02-2004, om 20:27 heeft koekiemonster dit gezegd in bericht #9
Was het toevallig slecht weer (dichtbewolkt en regen) toen het fixen zo lang duurde? Bekend is dat de weersomstandigheden een grote invloed vormen.
Helaas duurt het fixen iedere keer zo lang, tenminste als het een koude start betreft.
Warm, vaak heel vlot, tot ongerveer binnen 10 tellen.


Groet...Wil
__________________
Iedere dag feest !!
Wel zelf de vlaggetjes ophangen.
Met citaat reageren
  #11  
Oud 16 februari 2004, 22:25
koekiemonster's schermafbeelding
koekiemonster koekiemonster is offline
Moderatorkoek
Voornaam: Gerrit
Model: Garmin iQue 3600
 
Geregistreerd: 03 augustus 2002
Locatie: Oterleek
Berichten: 4.945
Stuur een bericht via MSN naar koekiemonster
Is dat binnen of buiten?
Met citaat reageren
  #12  
Oud 16 februari 2004, 22:42
wilvangorp's schermafbeelding
wilvangorp wilvangorp is offline
Senior lid
Voornaam: Wil
Model: Garmin iQue 3600
 
Geregistreerd: 31 december 2003
Locatie: Rijen.
Berichten: 55
Citaat:
Op 16-02-2004, om 21:25 heeft koekiemonster dit gezegd in bericht #11
Is dat binnen of buiten?
Uiteraard buiten !!
__________________
Iedere dag feest !!
Wel zelf de vlaggetjes ophangen.
Met citaat reageren
  #13  
Oud 17 februari 2004, 15:54
miniad miniad is offline
Senior lid
Model: Palm Z22
 
Geregistreerd: 07 februari 2003
Berichten: 506
Citaat:
Helaas duurt het fixen iedere keer zo lang, tenminste als het een koude start betreft.
WilvanGorp kun je misschien wat duidelijker zijn??

Ik heb vandaag ook even uitgebreid getest.
Als je de iQue een tijdje niet heb gebruikt of je bent van plaats veranderd zonder dat je de iQue aangeschakeld had, dan heeft hij weer opnieuw aan plaatsbepaling te doen. Je kunt hem helpen door de huidige plaats op te geven.
Maar dit ken ik ook van andere GPS(en) en in het bijzonder van de GPS V. Bij deze laatste was het soms (iets meer dan soms ) wel erg triest en duurde het wel meer dan een half uur.
Gelukkig niet bij de iQue want die is daarmee vergeleken bijzonder snel.
Met citaat reageren
  #14  
Oud 17 februari 2004, 17:46
wilvangorp's schermafbeelding
wilvangorp wilvangorp is offline
Senior lid
Voornaam: Wil
Model: Garmin iQue 3600
 
Geregistreerd: 31 december 2003
Locatie: Rijen.
Berichten: 55
Citaat:
Op 17-02-2004, om 14:54 heeft miniad dit gezegd in bericht #13


WilvanGorp kun je misschien wat duidelijker zijn??

Ik heb vandaag ook even uitgebreid getest.
Als je de iQue een tijdje niet heb gebruikt of je bent van plaats veranderd zonder dat je de iQue aangeschakeld had, dan heeft hij weer opnieuw aan plaatsbepaling te doen. Je kunt hem helpen door de huidige plaats op te geven.
Maar dit ken ik ook van andere GPS(en) en in het bijzonder van de GPS V. Bij deze laatste was het soms (iets meer dan soms ) wel erg triest en duurde het wel meer dan een half uur.
Gelukkig niet bij de iQue want die is daarmee vergeleken bijzonder snel.
Ik gebruik mijn IQUE vrijwel dagelijks, en verplaatsen over grotere afstanden doe ik hem niet zonder dat ie aanstaat. Ik ben dus gewoon benieuwd of dit bij andere IQUE gebruikers dan ook 10 minuten of langer duurt.

Groeten Wil
__________________
Iedere dag feest !!
Wel zelf de vlaggetjes ophangen.
Met citaat reageren
  #15  
Oud 17 februari 2004, 17:58
miniad miniad is offline
Senior lid
Model: Palm Z22
 
Geregistreerd: 07 februari 2003
Berichten: 506
Citaat:
Ik gebruik mijn IQUE vrijwel dagelijks, en verplaatsen over grotere afstanden doe ik hem niet zonder dat ie aanstaat. Ik ben dus gewoon benieuwd of dit bij andere IQUE gebruikers dan ook 10 minuten of langer duurt.
Bij mij duurt het wat langer dan normaal als ik mij verplaatst heb zonder dat de iQue aan stond.

Ik ben net zo benieuwd als jij wat de ervaring is van de andere iQue gebruikers.

ik blijf het volgen..
Met citaat reageren
  #16  
Oud 20 februari 2004, 02:45
Tjebbe
Guest
 
Berichten: n/a
Re: iQue 3600 software version Release 3 as of February 16, 2004

Citaat:
Op 16-02-2004, om 09:32 heeft miniad dit gezegd in bericht #1
Op onderstaande link vind ik de nieuwe release versie 3 per ingang van 16 januari 2004.
Als ik ga downloaden krijg ik nog de oude versie..

misschien ben ik nog wat te vroeg



Release versie 3 voor de iQue
nu lijkt ie het wel te doen...!
dus, succes!

Groet,
Fedde.
Met citaat reageren
  #17  
Oud 20 februari 2004, 09:24
miniad miniad is offline
Senior lid
Model: Palm Z22
 
Geregistreerd: 07 februari 2003
Berichten: 506
Toppie.. ik ga versie 3 downloaden en eens goed bestuderen..

succes
Met citaat reageren
  #18  
Oud 21 februari 2004, 07:42
wilvangorp's schermafbeelding
wilvangorp wilvangorp is offline
Senior lid
Voornaam: Wil
Model: Garmin iQue 3600
 
Geregistreerd: 31 december 2003
Locatie: Rijen.
Berichten: 55
Thumbs up

Citaat:
Op 20-02-2004, om 08:24 heeft miniad dit gezegd in bericht #17
Toppie.. ik ga versie 3 downloaden en eens goed bestuderen..

succes
Ad, je info bleek inderdaad correct hé !
Ik heb dit weekeinde "verplichtingen", dus ik laat het grondig doorspitten van de nwe release graag aan je over, en zie je berichten met belangstelling op dit forum verschijnen.
Na het weekeinde zal ik er dan zelf ook eens aan beginnen.

Groeten....Wil
__________________
Iedere dag feest !!
Wel zelf de vlaggetjes ophangen.
Met citaat reageren
  #19  
Oud 21 februari 2004, 08:00
miniad miniad is offline
Senior lid
Model: Palm Z22
 
Geregistreerd: 07 februari 2003
Berichten: 506
Citaat:
Ad, je info bleek inderdaad correct hé !
Had je getwijfeld dan?
De iQue is één grote waarheid..

Ik zie graag jouw bevindingen (na het weekend) tegemoet.
Met citaat reageren
  #20  
Oud 25 februari 2004, 21:08
wilvangorp's schermafbeelding
wilvangorp wilvangorp is offline
Senior lid
Voornaam: Wil
Model: Garmin iQue 3600
 
Geregistreerd: 31 december 2003
Locatie: Rijen.
Berichten: 55
Smile

Citaat:
Op 21-02-2004, om 07:00 heeft miniad dit gezegd in bericht #19


Had je getwijfeld dan?
De iQue is één grote waarheid..

Ik zie graag jouw bevindingen (na het weekend) tegemoet.
Hoi hoi,

Vandaag nieuwe software geinstalleerd.
"Added brightness adjustment to the power key" Zou toch moeten betekenen dat met de powerknop de helderheid van het scherm voortaangeregeld zou moeten kunnen worden? Als mijn Engels net zo goed als dat van jou tenminste. Maar ja ik kan mijn eigen Nederlands al niet goed volgen dus!!
Is bij jou audio "control baas boost"er wel bij geplaatst, of heeft het ontbreken hiervan te maken met Aeroplayer?

Groeten........Wil
__________________
Iedere dag feest !!
Wel zelf de vlaggetjes ophangen.
Met citaat reageren
Reageren

Favorieten/bladwijzers


Er zijn 1 actieve gebruikers die momenteel deze discussie bekijken (0 leden en 1 gasten)
 
Discussietools
Weergave

Regels voor berichten
Je mag geen nieuwe discussies starten
Je mag niet reageren op berichten
Je mag geen bijlagen versturen
Je mag niet je berichten bewerken

BB code is Aan
Smileys zijn Aan
[IMG]-code is Aan
HTML-code is Uit


Alle tijden zijn GMT +1. Het is nu 15:34.


Apple iPhone en iPad
(c) Nederlandse Palmclub Stichting 1999-2023